Investigation on Mechanical Properties of Silica Fume Blended High Strength Concrete

Authors

  • J Guru Jawahar Professor, Department of Civil Engineering, Annamacharya Institute of Technology and Sciences, Autonomous, Tirupati, India-517520
  • B. Srinadh B.Tech Student, Department of Civil Engineering, Annamacharya Institute of Technology and Sciences, Autonomous, Tirupati, India-517520
  • B. Prudvi Raj B.Tech Student, Department of Civil Engineering, Annamacharya Institute of Technology and Sciences, Autonomous, Tirupati, India-517520
  • U. Shireesha B.Tech Student, Department of Civil Engineering, Annamacharya Institute of Technology and Sciences, Autonomous, Tirupati, India-517520
  • C. Vijay Kumar B.Tech Student, Department of Civil Engineering, Annamacharya Institute of Technology and Sciences, Autonomous, Tirupati, India-517520
  • P. Narasimha B.Tech Student, Department of Civil Engineering, Annamacharya Institute of Technology and Sciences, Autonomous, Tirupati, India-517520

Keywords:

Mechanical Properties, Compressive Strength, Splitting Strength

Abstract

The investigation on the mechanical properties of silica fume blended high-strength concrete aims to study the effect of adding silica fume as a partial replacement of cement on the M60, M70 and M80 grade of high strength concrete. In this study, silica fume was kept at 15% by weight of cement, and the resulting concrete was tested for compressive strength and splitting tensile strength. The results show that the 15% replacement of silica fume improved the mechanical properties of concrete significantly. It is observed that as curing period increases, the compressive strength and splitting tensile strength values were increased. It is concluded that the optimum proportion of silica fume significantly contributed to the strength of high strength concrete.

 

 

Author Biographies

J Guru Jawahar, Professor, Department of Civil Engineering, Annamacharya Institute of Technology and Sciences, Autonomous, Tirupati, India-517520

 

 

B. Srinadh, B.Tech Student, Department of Civil Engineering, Annamacharya Institute of Technology and Sciences, Autonomous, Tirupati, India-517520

 

 

B. Prudvi Raj, B.Tech Student, Department of Civil Engineering, Annamacharya Institute of Technology and Sciences, Autonomous, Tirupati, India-517520

 

 

U. Shireesha, B.Tech Student, Department of Civil Engineering, Annamacharya Institute of Technology and Sciences, Autonomous, Tirupati, India-517520

 

 

C. Vijay Kumar, B.Tech Student, Department of Civil Engineering, Annamacharya Institute of Technology and Sciences, Autonomous, Tirupati, India-517520

 

 

P. Narasimha, B.Tech Student, Department of Civil Engineering, Annamacharya Institute of Technology and Sciences, Autonomous, Tirupati, India-517520

 

 

Downloads

Published

2023-04-04

How to Cite

Jawahar, J. G., Srinadh, B., Raj, B. P., Shireesha, U., Kumar, C. V., & Narasimha, P. (2023). Investigation on Mechanical Properties of Silica Fume Blended High Strength Concrete. Erudite Journal of Engineering, Technology and Management Sciences, 3(1). Retrieved from https://www.ejetms.com/index.php/ejetms/article/view/27

Issue

Vol. 3 No. 1 (2023): Volume 3 Issue 1 | March 2023

Section

Articles